Array cable tools
MC Solarline 2 Crimping Tool
Crimping tool to assemble MC Solarline 2 locking connectors. Crimping tool is for 10 or 12 AWG stranded wire.
| Description | Item code |
|
MC Solarline 2 MC4 pin crimper for 10/12 AWG wire |
094-00104 |
Tyco SolarLok Crimping Tool
Crimping tool to assemble SolarLok locking connectors. Crimping tool is for 10 or 12 AWG stranded wire.
| Description | Item code |
|
Tyco crimper for 10/12 AWG wire |
094-00114 |
MC4 Solarline 2 Open-End Spanner Set
This set of 2 plastic wrenches is used to tighten the sealing nut in the connectors and to unlock the male and female connector. Sold in pack of 2 wrenches.
| Description | Item code |
|
MC Solarline 2 open-end spanner set |
094-00112 |
Helios H4 Assembly Tools
The H4 wrench is used for assembling and disconnecting the connectors. The ring tool is for disconnecting the connectors only.
| Description | Item code |
|
Helios wrench/disconnect/assembly tool |
094-00008 |
|
Helios H4 Ring Tool |
094-00010 |
Rennsteig Crimping Tool Sets and Accessories
There are 2 sets available: The MC3/MC4/Tyco set comes with 3 die-sets and 3 pin locators for crimping MC Solarline 1 (MC3) and Solarline 2 (MC4) pins and Tyco Solarlok pins on 14, 12, and 10 AWG stranded wire. The MC4/H4/H&S set comes with die-sets and pin locators for Solarline 2 (MC4) and Helios (H4), as well as a die-set for crimping H&S (Radox) pins on 14, 12, 10 AWG stranded wire. Comes with a molded plastic carrying case.
Individual die-sets and pin locators are also available.
| Description | Item code |
|
Rennsteig crimper set for MC3, MC4, Tyco |
094-00123 |
|
Rennsteig crimper set for MC4, H4, H&S |
094-00136 |
|
Rennsteig die only - MC4 |
094-00126 |
|
Rennsteig die only -Tyco |
094-00127 |
|
Rennsteig die only- Helios H4 |
094-00130 |
|
Rennsteig die only – H&S (Radox) |
094-00134 |
|
Rennsteig pin locator only - MC4 |
094-00132 |
|
Rennsteig pin locator only - Tyco |
094-00133 |
|
Rennsteig pin locator only – Helios H4 |
094-00131 |
|
Rennsteig stripper for 14, 12, 10 AWG |
094-00128 |
|
Rennsteig cutter for 14, 12, 10 AWG |
094-00129 |
Hammer Crimp Tool
This simple, inexpensive crimping tool can be used to crimp connectors on 8 through 4/0 AWG wire. Spring-loaded pin locks in "up" position for loading connector and cable. When released, the pin holds the connector securely during crimping. Use with a hammer or vice.
| Description | Item code |
|
Hammer crimp tool |
094-00013 |