MP

The MP Magnum Panels are available in three sizes, each with either a 30-amp two-pole 120/240 VAC output breaker or a 60-amp 120 VAC output breaker. They are designed for use with two series-stacked MS4024 inverters, or up to four parallel connected MS-PAE inverters.

The MPSL (magnum panel, single enclosure, low capacity) accommodates up to 2 inverters with the use of an MPX Extenssion Box. Includes a 250A DC breaker, a 125A AC bypass breaker, a 500A/50mv DC shunt and inverter AC input protection, and all AC/DC wiring for dual inverters (source/ load wiring not included).

The MPSH (magnum panel, single enclosure, high capacity) accommodates a maximum of three inverters. One inverter can be connected directly to the MPSH. Each additional inverter requires an MPX. The MPSH includes one 250A DC breaker, a 125A AC bypass breaker, a 1000A/100mv DC shunt and inverter AC input protection, and all AC/DC wiring for dual inverters (source/load wiring not included).

The MPHD (magnum panel, dual enclosure, high capacity – accommodates as many as 4 inverters with 2 enclosures – one for AC and one for DC connections. Two inverters can be connected to the MPHD. The third and fourth inverters require one MPX for each. The MPHD includes two 250A DC breakers, a 125A AC bypass breaker, a 1000A/100mv DC shunt and inverter AC input protection, and all AC/DC wiring for dual inverters (source/load wiring not included)

Mount and connect additional inverters to MP Series Systems Panels using MPX Series Extension Boxes. They mate perfectly to the bottom of Magnum MS4024 or the MS-PAE inverters. Includes 250A DC breaker and all AC and DC inverter wiring for adding another inverter. Left and right-hand versions mount on either side of an MP Panel. An MP-HOOD inverter hood (not shown) allows vertical mounting. Choose from six extension box models depending on the type MP enclosure to be installed and which side of the MP enclosure it will be installed on.